Embroidery
EMB-1001
2D Embroidery
2D embroidery stitches the design flat onto the fabric. Four stitch types cover most designs. Chain stitch forms linked loops for a textured line, running stitch makes a clean, continuous outline, satin stitch gives a smooth, glossy outline, and tatami fills larger areas with a flat, textured pattern.
VISUAL EFFECTS
Flat stitched artwork; chain, running, satin or tatami stitch depending on the design
HAND-FEEL
Slightly raised, textured thread surface; area stiffens with stitch density
BENEFITS
Fine outlines and solid filled areas can sit in one design, with a wide range of thread colours. The stitched surface adds texture and depth to logos and text.
LIMITATIONS
Uneven thread tension gives uneven stitches, and poor hooping or too much tension can pucker or distort the fabric. Settings are tested on the production fabric before bulk.
PROCESS
[01] Design Creation
Prepare the design with the stitch type, density and level of detail in mind.
[02] Digitising
Convert the design into an embroidery file, for example DST or PES, and assign a stitch type and density to each area.
[03] Hooping
Secure the fabric in an embroidery hoop so it stays taut and the design stays accurate.
[04] Thread Selection
Choose thread colours and thickness for the contrast and texture required.
[05] Machine Setup
Load the file and set stitch length, density, tension and speed to suit the fabric and thread.
TO CONSIDER
Design Complexity
Match the design to the stitch. Satin outlines suit smooth lines and curves, and tatami suits larger filled areas.
Fabric Selection
Choose fabrics that suit the stitch, considering their thickness, texture and stability during stitching.
Thread Quality
Choose high-quality embroidery thread for a consistent finish, and consider its durability and colourfastness.
Testing on Scrap Material
Test on scrap fabric before embroidering the final product, to confirm the design and settings.